3D printed Japanese style Oni Demon mask D.I.Y Kit

Made of durable and strong PLA plastic.
Wear it 'as is' or finish the model by sanding and painting it.

Mask Dimensions:

5.5" inches / 139.7 mm WIDE,
6" inches / 152 mm TALL,
2"in / 50 mm inner cavity DEPTH.

You will be receiving:

1 Piece mask



++++++++++++++++++++++++++++++++++++++++++++++++
 
Assembly Instructions:

1. Finishing and painting the piece and the final design are your choice. Remove any
--- small bits of flash, burrs, etc. on the model. Create breathing holes if necessary.

--- Carefully attach the fasteners of your choice. Elastic Band or Velcro works best.

2. If you are satisfied with the surface of the model out of the box, skip this step.
(Next is paint prep)

--- Prepare the item surface for spray paint, airbrush, Acrylics, etc. by sanding the entire surface
--- with 150-300+ grit sandpaper. Next, using 50-91% Rubbing Alcohol and clean cloth, wipe the --- entire surface of you item. Then allow the item to dry completely. You may use a hairdryer to ---- speedup the process.

3. After drying, the surface should now be free of any oils, adhesives and micro dust particles
--- from sanding. Ready to paint. I strongly suggest purchasing a spray paint that contains the
--- primer mixed with the paint. Krylon and Rustoleum both sell Primer+Paint Spray cans ( Sticks --- to all plastics for example) there are other similar varieties worldwide.